QU-I.C-CHEX TOOL allows you to view the pins in your interchangeable core

QU-I.C-CHEX TOOL

QU-I.C-CHEX

Part # QCT-1

(Intended for use with 6 or 7 pin cores

but will also work with 5 pin cores)

Used to check individual chamber pin stacks through a quick visual inspection and also allows you to easily move pin stacks as a unit

The Clear View Tube holds the pin stack intact as it is elevated out of the core chamber - once checked it can be simply pushed (usually they fall back naturally) back down into that chamber - or moved for troubleshooting or transfer purposes.

Has a special light reflective surface to aid viewing

Dual chamber indexing pins for positioning stability

Contoured to conform to your fingers

Grip-Grooves around the outer edge

Grip inserts in front and back

Can be used with the core held in your hand

or in the Xperinetix QU-I.C-LOAD TOOL

To transfer / transport a pin stack once it is inside the viewing tube of the QU-I.C-CHEX it will be necessary to tip (or rotate) the core to a more horizontal orientation so that the pins don’t fall out when you separate it from the core.

The QU-I.C-CHEX was designed to work with The Troubleshooting Top chamber grooves on the QU-I.C-TEST Tool. Using the QU-I.C-CHEX you can easily transfer pin stacks from the core and back again when your troubleshooting is complete.