YOU’LL LOVE OUR ALL NEW "ULTRA CORE"
WITH THE GROOVY "QU-I.C.-MARK" GROOVE
BECAUSE IT OFFERS SO MUCH MORE THAN ANY
OTHER CORE
The finest (a.k.a. Best) quality small format interchangeable core.
Each core has the Xperinetix "QU-I.C.-MARK" groove which allows you to use a
21st Century, state-of-the-art computerized desktop thermal labeling system
((see "QU-I.C-MARK" System)) designed especially for the I-Core lock specialist:
 |
Labels are easy to custom print and apply, making this procedure much more cost effective. A small, simple to operate desktop printer is all that is necessary. |
|
Labels are easily removed when re-combinating. No need to file off, grind off or "X" out (with additional useless stamping) the previous core mark. |
|
No damage to this precisely made mechanical locking mechanism which can occur when beating with metal stamps. Crushing and binding are eliminated. |
|
Much safer than stamping with a hammer and stamp set. No ear and eye protection is necessary and stamps never become dangerous projectiles. |
Note: DO NOT metal stamp in the flat, recessed "QU-I.C.-MARK" groove area. This is only to be used for labels. Should you insist on old-fashioned metal stamping (which was used in the last century) these cores will accept your beating in the normal rounded area above the locking lug on the left (active) side of the core.
It is "Preamed" which stands for Pre-reamed. You’ll notice that the pin chamber holes have been slightly reamed:
|
Preaming removes all nicks and burrs from the pin chamber openings. |
|
This makes it much easier to insert pin segments like those @/#!:$-ing 4B’s. Our unique "funnel feature" minimizes jamming so pin segments drop in with no forcing. |
|
You’ll find that when capping, the caps will press in smoother with less burring at the top of the core. |
|
Should you find it necessary to eject pins from a chamber, you’ll also experience less burring. |
RELAX AND ENJOY COMBINATING THE ALL NEW XPERINETIX WAY
Making life a little safer…one core at a time.
